Research, design, and development of a central paste wax distribution system for investment casting production
Southern Tool's investment casting facility was experiencing an increased demand for precision castings made by the age old "lost wax" process. As production was stepped up in response to this demand, new and better methods of production were sought to increase both quality and efficiency. A basic part of producing castings by the "lost wax" process requires the making of a wax pattern having geometry and dimensions of the metal casting to be made. This wax pattern is made by injecting a special investment casting wax, commonly in the paste condition, into a metal die. In the process of making the wax patterns, liquid wax was commonly cooled to the paste temperature by pouring the liquid wax into a heated tank, allowing heat to be lost or transferred to the surroundings until the desired temperature was reached, and then maintaing the wax at this temperature. This method of cooling wax was very slow and cumbersome to the production process. Due to the difficulty of cooling by other methods and subsequent problems involved in transferring the paste wax to the work areas, few significant developments had been made in this area.
A continuous production system capable of cooling the liquid wax to the non-Newtonian paste condition and supplying the wax to the desired location was designed and developed. Cooling was accomplished by means of a scraped-surface heat exchanger which had been previously used in similiar non-Newtonian applications. Flow data was taken and the resulting flow curve was plotted for paste wax at 145°F. The particular casting wax utilized for testing was Freeman Manufacturing Company's No. 5350-H with a melting point of 195°F. Procedures for calculating flow parameters in various pipe sizes were investigated and analytical procedures were established.
Thesis78.W539.pdf
1.86 MB
Adobe PDF
fb7bf7676d1da431643d62b524039f83