Orinc-a one-dimensional implicit approach to the inverse heat conduction problem
This thesis develops an implicit solution technique to determine both the transient surface temperature and the transient surface heat flux of electrically heated rods given the power input and an "indicated" internal temperature. The analysis requires the solution of the classical inverse heat conduction problem which in the mathematical literature is usually referred to as a parabolic continuation problem.
This technique will be applied in the analytical determination of the surface conditions of indirect electrically heated nuclear fuel pin simulators, given the rod power input and the response from a thermocouple embedded in the simulator during a simulated loss-of-coolant accident transient.
A digital computer program ORINC (ORNL Inverse Code) is developed. The code solves a one-dimensional, transient, lumped parameter, implicit formulation of the inverse conduction problem at each bundle thermocouple position in the Thermal-Hydraulic Test Facility (THTF), at the Oak Ridge National Laboratory.
This work was motivated by potential nuclear fuel pin overheating during a postulated loss-of-coolant accident in pressurized water nuclear reactors and the lack of experimental and theoretical transient heat transfer data covering accidents of this type.
Thesis78.O882.pdf
16.51 MB
Adobe PDF
3655af1315b78a265d5ef25befd45a4e