Nucleation and growth of plagioclase and the development of textures in high-alumina basaltic melt
Dynamic crystallization experiments were conducted in order to determine the conditions necessary to produce poikilitic, inter-sertal and porphyritic textures from a high-alumina basaltic melt. Such a melt, modeled after lunar rock 14310 has plagioclase as the liquidus (1304°c) and most abundant (66 modal %) phase, and it is therefore this mineral which controls the textures developed. During isothermal crystallization in the undercooling range of 12-54°c, plagioclase initially grows by a diffusion-controlled process. When the crystals reach about 40 µm size, they become tabular, and interface-controlled growth becomes dominant. As determined from the controlled cooling-rate experiments, the 40 µm tabular crystals are the most suitable substrates for further plagioclase growth, resulting in the formation of large laths, regardless of whether the rock cooled at 2°c/hr or at 10°/hr.
Poikilitic texture comprising small plagioclase crystals embedded in a pyroxene was developed by cooling a melt containing high abundance of non-faceted crystals. Intersertal texture was produced by cooling a melt containing faceted, =40 µm plagioclases. Porphyritic texture formed by the linear cooling of a relatively nuclei-free melt from above or just below the liquidus. These results add to the understanding of various factors that affect textural formation. In addition, they show the danger of obtaining incorrect conclusions if all the parameters that may affect the development of basaltic textures are not invoked.
Thesis78.N425.pdf
2.26 MB
Adobe PDF
e8338bba0c10c7fb9932e4644cd70ea8